conversion factors of 6.7 nephelos per 1.0 NTU and 0.245 EBCs per
1.0 NTU.
The turbidimeter has an RS232 output for connection to a printer, data
logger or computer.
Figure 1 Front overview
1 Keypad 4 Cover for the sample cell
compartment
2 Sample cell holder 5 Five-digit LED display
3 Light shield
Figure 2 Back overview
1 Power cord connector 4 DB9 connector for RS232 cable
2 Fuse holder 5 Air purge fitting
3 Power switch 6 Lamp access cover
Product components
Refer to Figure 3 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
6 English
To Next Page
Loading...
