Need help?Do you have a question about the Hach 2100P ISO and is the answer not in the manual?
General| Instrument Type | Portable Turbidimeter |
|---|---|
| Measurement Range | 0 to 1000 NTU |
| Resolution | 0.01 NTU on lowest range |
| Light Source | Tungsten filament lamp |
| Detector | Silicon Photodiode |
| Operating Temperature | 0 to 50 °C (32 to 122 °F) |
| Storage Temperature | -20 to 60 °C (-4 to 140 °F) |
| Power Supply | 4 AA alkaline batteries |
| Dimensions | 22.9 cm x 10.7 cm x 7.7 cm (9.0 in x 4.2 in x 3.0 in) |
| Compliance | ISO 7027 |
Details about external power supplies and compliance.
Standards for electromagnetic interference immunity.
Standards for electromagnetic emissions.
US regulatory compliance for radio frequency interference.
Explains signal words like Danger, Caution, Note.
Information on reading instrument labels and tags.
Overview of the turbidimeter's function and operation.
Explains the nephelometric principle and ratio optical system.
Step-by-step guide for installing batteries.
Details on instrument controls and display indicators.
General information on calibrating the turbidimeter with standards.
Details on using StablCal standards for calibration.
Step-by-step guide for calibrating the turbidimeter.
Steps for calibrating using user-defined standards.
Step-by-step procedure for measuring turbidity.
Techniques to improve measurement accuracy and repeatability.
Detailed instructions for cleaning sample cells.
Methods for removing air bubbles from samples.
How to handle samples with turbidity exceeding the instrument's range.
Instructions for cleaning the turbidimeter and accessories.
Steps for replacing the instrument's batteries.
Procedure for replacing the instrument's lamp.
How to access instrument diagnostic modes.
List and explanation of diagnostic codes.
Step-by-step guide for using diagnostic functions.
Explains various error messages and their causes.
Meaning of the CAL? indicator and when to recalibrate.
To Next Page
