Main menu overview
Table 3 shows the main menu options.
Table 3 Main menu options
Option Description
Programming
Configures data logging, the alarms and the sampling program.
Review Data
Shows the sampling history (e.g., samples collected and missed samples). Shows the
measurement data (the data log).
Manual Operation
Collects a grab sample, moves the distributor arm to a selected bottle position or operates
the pump in the forward or reverse direction.
Calibration
Calibrates the sample volume, the attached sensors and the analog input (for flow pacing)
at the AUX port, if applicable.
Export/Import
Saves measurement data, sample history and program settings to a memory stick. Copies
the program settings from a memory stick to the sampler.
Hardware Setup
Configures the sampler, sampler ports and attached sensors. Configures and calibrates the
liquid detector.
Diagnostics
Shows the Status screen, event log, alarm log and memory use. Shows the status and
configuration of the AUX I/O port. Shows the cabinet temperature (AWRS sampler only).
Completes a diagnostic test of the attached sensors, distributor arm, keypad and display.
Shows the total run time, forward run time and reverse run time of the pump motor.
General settings
Shows the instrument information (e.g., serial number). Configures the display settings (e.g.,
language, date and measurement units). Configures the security settings. Configures the
tubing life reminder setting. Erases the sampling history and/or the selected logs.
Operation
Configuration
Configure the general settings
1. Push MENU.
2. Select General Settings.
3. Select an option.
English
5
To Next Page
Loading...
Need help?
General
