Hach Digesdahl 23130-20 - Fuse Replacement; Kit Replacement Parts

81
SECTION 5 MAINTENANCE
5.1 Fuse Replacement
The fuse holder is located on the back panel within the power cord
receptacle. See Figure 2. To replace a fuse, turn off the instrument power
and disconnect the power cord from the back panel. Removal of the
vertical support is necessary. Remove the fuse holder by prying with a
small screwdriver or other pointed tool at the small opening at the top of
the fuse holder. Replace the fuse with the same type and rating used
originally. Refer to Replacement Parts.
5.2 Kit Replacement Parts
Description Unit Cat. No.
Aspirator, without check valve, 3/8” NPT ..................................................each............2131-02
Cooling Pad.................................................................................................each..........18376-00
Finger Cots................................................................................................pkg/2..........14647-02
Flask, digestion, 100 mL.............................................................................each..........23125-42
Flask Weight................................................................................................each..........44340-00
Fractionating Head......................................................................................each..........22855-20
Fractionating Column Kit..............................................................................................23131-20
Kit includes: Fractionating Head; Capillary Flow Funnel 8.3 cm
(3.25”); Column Baffle; Tubing; C-Flex, 5 feet; Vent Trap Body; and
Vent Tr ap C ap
Funnel, Capillary Flow................................................................................each..........22856-00
Fuse, 4 A, 125 V Slow-blow, for heater assembly......................................each..........44591-00
Fuse, 2 A, for 250 V heater assembly.........................................................each..........44398-00
Goggles, safety............................................................................................each..........18421-00
Heat Shield..................................................................................................each..........18380-00
Heater Assembly, 115 V..............................................................................each ..........44336-20
Heater Assembly, 230 V..............................................................................each ..........44336-21
Heater Element Assembly, 120 V ...............................................................each..........18565-01
Heater Element Assembly, 240 V ...............................................................each..........18565-02
Instruction Manual ......................................................................................each..........23130-18
Power Cord, 115 V, UL/CSA approved ......................................................each ..........18010-00
Power Cord, 230V, VDE-approved for European operation.......................each..........46836-00
Receptacle, column .....................................................................................each..........45926-00
Tubing, C-flex ........................................................................................25 feet..........23273-37
Vertical Support, heater...............................................................................each..........44378-00
客服：400 688 9809
网址：www.mamots.com 电话：0431-85178766