Need help?Do you have a question about the Hach TitraLab AT1000 Series and is the answer not in the manual?
General| Type | Automatic Titrator |
|---|---|
| pH Range | 0 to 14 |
| Temperature Range | 0 to 100 °C |
| Power Supply | 100 - 240 V AC, 50/60 Hz |
| pH Accuracy | ±0.01 pH |
| Redox Accuracy | ±1 mV |
| Temperature Accuracy | ±0.5 °C |
| pH Resolution | 0.001 pH |
| Redox Resolution | 0.1 mV |
| Temperature Resolution | 0.1 °C |
| Applications | food and beverage testing |
| mV Range | -2000 to +2000 mV |
| Conductivity Range | N/A (Available on specific models) |
| Redox Range | -2000 to +2000 mV |
| Stirrer Speed | 0 to 1000 rpm |
| Data Storage | USB drive |
| Display | Color touchscreen |
| Connectivity | USB |
| Conductivity Accuracy | ±0.5% |
| Description | The Hach TitraLab AT1000 Series is a high-performance automatic titrator designed for precise and accurate titration analysis in laboratory environments. |
Details product specifications including dimensions, power, and environmental limits.
Covers hazard warnings, precautionary labels, certifications, and RoHS compliance.
Details compliance with Canadian/FCC regulations and material restrictions.
Describes the instrument's components and their functions.
Explains ports and lists essential instrument parts.
Rules for setup and connecting to electrical power.
Step-by-step guide for physically installing the syringe component.
Procedures for connecting fluidic tubes and attaching the sensor.
Steps for preparing and connecting titrant and reagent bottles.
Guide for attaching and setting up an optional external pump.
Instructions for installing an external propeller stirrer and connecting a balance.
Guidance on setting up PC software and installing the verification kit.
Explains the instrument's keypad layout and the main display screen.
Describes how to navigate through the instrument's menus and options.
Initial setup steps including application installation and basic settings.
Loading applications and purging the system for analysis.
Detailed steps for calibrating sensors and titrants.
Steps for preparing samples and conducting measurements.
How to modify default parameters for analysis applications.
Procedures for managing data logs and purging the system.
Recommended tasks and cleaning guidelines for instrument upkeep.
Steps for replacing tubes, valve blocks, and pump cassettes.
Procedures for preparing the instrument for storage or shipping.
Solutions for measurement, calibration, and USB errors.
Catalog of replaceable components, accessories, and electrodes.
Details on adjustable parameters for different applications in basic/expert modes.
Answers to common questions about applications, mechanical operation, and titration.
Guides on setting instrument parameters like applications, operators, and network.
To Next Page
