Table 4 Information icons
Icon Description
A printer is connected to the instrument
A USB key is connected to the instrument
A sensor is connected to sensor port 1
A sensor is connected to sensor port 2
The data log file is full. Refer to Manage the data log on page 39 for the options available to manage the data log file.
A measurement is in operation using the PC software. The keyboard is locked.
5.3 Menu structure
The three primary menus are shown in Table 5, Table 6 and Table 7.
Table 5 Home menu
Option Description
Data log
Manage the data log file
Calibration
Electrode and titrant calibration procedures
Settings
See the table entry below
Maintenance
See the table entry below
Purge
Remove air from the syringe, and from the syringe and pump tubes
Table 6 Settings menu
Option Description
Applications
Manage the installed applications
Operators
Set up and manage the instrument operators
Date & Time
Set the date and time
User interface and navigation
26
To Next Page
Loading...
