Need help?Do you have a question about the Hach Sigma 1600 and is the answer not in the manual?
General| Model | Sigma 1600 |
|---|---|
| Category | Laboratory Equipment |
| Type | Automatic Sampler |
| Bottle Qty | 24 |
| Number of Samples | Up to 24 |
| Bottle Volume | 1 L |
| Power Supply | 115 VAC, 60 Hz or 230 VAC, 50 Hz |
Explains hazard signal words and precautionary symbols for safe operation.
Warns against installing the sampler in hazardous locations as defined by codes.
Details dangers and definitions related to confined space entry.
Describes how the sampler collects samples based on time or flow rate.
Explains sample frequency control using a quartz clock and time intervals.
Details sampling based on flow meter contact closures and adjustable volume.
Provides guidance on selecting an appropriate location for the sampler.
Details inlet and outlet piping connections, covering pumped and gravity flow methods.
Instructions for removing and installing the dipper arm assembly.
Explains power and signal wiring connections for the sampler.
Details the 4-20 mA input circuit and wiring options for flow proportional sampling.
Explains the pump control timer option, its operation, and wiring.
Describes the sampler's control panel layout, buttons, lights, and displays.
Explains timed-cycle, flow proportional, and 4-20mA proportional sampling modes.
Covers setting sample volume, per-bottle counts, and bottle-per-sample modes.
Details the operation and programming of the 24-bottle discrete sample kit.
Procedures for cleaning the sampler body, parts, and containers.
Information on lubrication requirements for the sampler's motor and refrigerator.
Procedure for maintaining the sampler's refrigerator condenser fins.
Provides telephone, fax, and mail details for ordering products.
Contact details for technical and customer service support.
Information and contact details for obtaining repair service.
Lists conditions not covered by the product warranty.
States the exclusive remedies for warranty breach.
To Next Page