Figure 9 Home screen example—One probe
1 Options menu: gives access to instructions and
other menus
7 Measurement value section: shows the measured
value, temperature and units
2 Data menu: gives access to view and manage data 8 Measurement stability status indicator: shows the
status of the measurement
3 Calibrate button: starts a calibration 9 Intellical probe port: shows the port location of the
connected probe
4 Read button: reads the sample or standard solution
value
10 Intellical probe name: shows the model name of
the connected probe
5 Sample ID: shows the name of the sample that is
measured
11 Bluetooth
®
icon (if Hach Communication Dongle is
installed): shows when a bluetooth connection is
active
6 Message area: shows the measurement status,
sample ID, errors and warnings
12 Battery charge indicator: shows the percent of the
battery charge
14 English
To Next Page
Loading...
