• Select the channel (Ad Hoc mode only).
• Check Enable Radio if needed.
• Select the country.
Set wireless security
1. On the Counter Navigation screen, push NETWORK.
2. Select the Wi-Fi Security tab.
3. Configure these options:
• Select the security type.
• Select the encryption type.
• Select the authentication type.
• Select the key type: Hex or Passphrase.
• Enter the key in the Key field and in the Retype Key field.
Particle counter navigation
The functions of the particle counter are accessed from the Counter Navigation screen. Table 2
shows the functions that are accessible through the navigation screen.
Table 2 Screen icon descriptions
Icon Function Description
Sample Measure particle counts. Refer to Measure particle counts on page 32.
Historical Review measurement results in the buffer; print, export or filter data. Refer to Review
historical buffer data on page 37.
Export Output file as comma separated value (CSV), tab separated, or PortAll files. Refer to
Export data on page 37.
Printer Print sample data as hard-copy. Refer to How to use the Print Center on page 35.
Locations Add/edit/remove areas; copy location settings, edit locations settings; edit alarms for
specific locations. Refer to Location management on page 25.
Group Load/add/edit a group; delete a group. Refer to Group management on page 27.
System Time/Date; Sleep time/backlight timeout; set logon requirements; set sounds for alarms;
manage users; set the units for flow rates; manage the data buffer. Refer to the CD for
more information. Refer to Configure the system on page 20.
Sizes Add/edit/delete a size (optional). Refer to Sizes function on page 28.
18 English
To Next Page
Loading...
