Hach QbD1200 AutoSampler User Manual

Install the rinse station
After each sample is analyzed, the reagent is flushed through the sample tube to remove the
remaining carbon. The flushed (used) reagent goes to the waste container. If an analyzer is
connected to the instrument, the analyzer controls when the rinse station operates. Refer to the
illustrated steps that follow to install the rinse station and the drain tubing. Make sure to use a
permitted waste container.
12
English

Hach QbD1200 AutoSampler Specifications

General

Brand	Hach
Model	QbD1200 AutoSampler
Category	Laboratory Equipment
Language	English