Table 3 Status indicator messages (continued)
Bit Message Indication
13 Measurement 3 Quality Bad Precision of measurement is out of the specified limits.
14 Measurement 3 Low Limit Measurement is below the specified range.
15 Measurement 3 High Limit Measurement is above the specified range.
5.2 Event Log
Refer to Table 4 for diagnostic device information.
Table 4 Event log
Event Description
ADDRESS Adjusted Profibus address
DATA ORDER Indicates the data order of 2 word variables in the cyclic and acyclic Profibus telegram
SIMULATION Indicates if the simulated data is set into the cyclic Profibus telegram.
SENSOR POWER Timestamp of the Profibus card power up
SET DATE/TIME Setup timestamp of the internal timer of the Profibus card
NEW CONFIG Timestamp of a new configuration
AUTO CONFIGURE Timestamp of a new menu setting
CODE VERSION Timestamp of a new software download (Software version)
English 19
To Next Page
Loading...
