EasyManua.ls Logo

Hach SC4500 - Section 1 Specifications

Hach SC4500
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 1 Specifications
Specifications are subject to change without notice.
Specification Details
Dimensions (W x H x D) ½ DIN-144 x 144 x 192 mm (5.7 x 5.7 x 7.6 in.)
Enclosure UL50E type 4X, IEC/EN 60529–IP 66, NEMA 250 type 4X
Metal enclosure with a corrosion-resistant finish
Weight 1.7 kg (3.7 lb) (Controller weight without optional expansion modules)
Pollution degree Environment: 4; instrument: 2
Overvoltage category II
Protection class I, connected to protective earth
Environmental conditions Indoor and outdoor use
Power requirements AC controller: 100–240 VAC ±10%, 50/60 Hz; 1 A (50 VA with 8W sensor load,
100VA with 28W sensor load)
DC controller: 18–28 VDC; 2.5 A (12W with 9W sensor load, 36W with 20 W
sensor load)
Operating temperature –20 to 60 °C (–4 to 140 °F) (8 W (AC)/9 W (DC) sensor load)
–20 to 45 °C (–4 to 113 °F) (28 W (AC)/20 W (DC) sensor load)
Linear derating between 45 and 60 °C (–1.33 W/°C)
Storage temperature –20 to 70 °C (–4 to 158 °F)
Relative humidity 0 to 95%, non-condensing
Altitude 2000 m (6562 ft) maximum
Display 3.5-inch TFT color display with capacitive touchpad
Measurement Two device, digital SC connectors
Relays (high voltage) Two relays (SPDT);
Wire gauge: 0.75 to 1.5 mm
2
(18 to 16 AWG)
AC controller
Maximum switching voltage: 100–240 VAC
Maximum switching current: 5 A Resistive/1 A Pilot Duty
Maximum switching power: 1200 VA Resistive/360 VA Pilot Duty
DC controller
Maximum switching voltage: 30 VAC or 42 VDC
Maximum switching current: 4 A Resistive/1 A Pilot Duty
Maximum switching power: 125 W Resistive/28 W Pilot Duty
Analog inputs (optional)
3
One 0-20 mA (or 4-20 mA) analog input on each analog input module
One analog sensor input on each sensor module
Maximum of two analog inputs
Analog outputs (optional)
3
Five 0–20 mA (or 4-20 mA) analog outputs on each analog output module
1
Digital communication
(optional)
3
Profibus DPV1 module, Modbus TCP, PROFINET module, EtherNet/IP
2
module
1
Refer to the module documentation for additional information.
Note: Install only one module in one of the available slots.
2
EtherNet/IP is a trademark of OVDA Inc.
English 3

Table of Contents

Other manuals for Hach SC4500

Related product manuals