HLS100 - USER MANUAL
6
3. OPERATIONS
3.1 MULTI USER MODE
3.1.1 MODE INTRODUCTION
Lock remains unlocked under multi user mode. Any 4-8 digit code can be used to lock and
unlock.
1. Put your belongings into the locker.
2. To Lock - Input any 4-8 digit code, close locker and turn the knob to the locked
position.
3. To Unlock - Input the same code and turn the knob to the unlocked position and
remove your belongings.
4. The locker is then available for the next user.
Important: Manager code should be programmed rst as the manager code can
be used for emergency unlock.
To Next Page
Loading...
Need help?
General
