Häfele HLS100 User Manual

HLS100 - USER MANUAL
7
3.1.2 SET LOCK INTO MULTI USER MODE
*#2# > manager code # > 1#
INPUT *#2#,
GREEN LIGHT
WILL BLINK
INPUT MANAGER
CODE #, LIGHT
WILL
BLINK SLOWLY
INPUT 1#,
MOTOR REVERSE,
AND GREEN LIGHT
WILL BLINK
FOR 1S
SET TO MULTI
USER MODE
SUCCESSFULLY
3.1.3 CHANGE THE MANAGER CODE (FACTORY SETTING: 456789)
*#1# > old manager code # > new manager code # > new manager code #
INPUT *#1#,
GREEN LIGHT
WILL BLINK
QUICKLY
INPUT THE
OLD
MANAGER
CODE #,GREEN
LIGHT WILL
BLINK SLOWLY
INPUT THE
NEW
MANAGER
CODE #, TWICE
LOCK WILL
PROMPT WITH
“BEEP” AND
GREEN LIGHT
WILL BLINK
FOR 1S
MANAGER
CODE SET
SUCCESSFULLY
Important: Manager code can be used for emergency unlock.
3.1.4 CHANGE THE USER CODE
In multi user mode, there is no need to set user code. Input any 4-8 digit code into the lock
followed by the same code to unlock.
INPUT ANY 4-8
DIGIT CODE #
TURN THE KNOB TO
THE LOCKED
POSITION, LOCKED
SUCCESSFULLY
INPUT THE SAME
CODE WHICH
LOCKED THE LOCK
TURN THE KNOB
TO THE UNLOCKED
POSITION,
UNLOCKED
SUCCESSFULLY
3.1.5 HOW TO USE THE USER CODE

Häfele HLS100 Specifications

General

Brand	Häfele
Model	HLS100
Category	Locks
Language	English