hager EK560 - User Manual

6LE001012C
ok
–
+
ok
–
+
ok
–
+
z
Digital, radio-operated,
programmable ambient thermostat
kit, weekly with wall-mounted
receiver
Thermostat description
This programmable ambient thermostat has been designed to bring you comfort and energy economy.
It is easy to install in your accommodation, where it regulates the ambient temperature in response to
its programs and sends run/stop commands to the wall-mounted receiver installed next to the boiler or
other heat source that is to be controlled.
It enables your heating installation to be programmedand regulated at four temperature levels:
- Comfort
: this is the temperature you desire during the hours you are present.
- Comfort 2
: 2nd temperature level that you desire during the time you are present.
- Eco
: this is the temperature you desire during short absences or at night.
- Frost protection
: this is the guaranteed minimum temperature during your prolonged absences.
It protects your accommodation against the dangers of frost.
It also enables you to program and regulate your air conditioning at 2 temperature levels:
- Comfort
: this is the temperature you desire during the hours you are present.
- Eco
: this is the temperature you desire during short absences or at night.
Thermostat description
ok
–
+
ok
–
+
ok
–
+
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
21
17
18
19
20
1 Context key for menu access
2 Context key for mode access holidays
3 Context key for access to the temporary
override
4 Confirmation key OK
5 Adjustment keys + and -
6 Indicator for days of the week
7 Automatic mode/manual mode (thermostat
without program)
8 Temperature settings adjustment
9 Standby
A Heating/Air-con selector
Z Programming/program selection
E Adjustment of the time and date
R Adjustment of settings
T Ambient temperature
Y Heating or air conditioning indicator
U Current mode (heating or air conditioning)
I Current setting (
, , , )
O Temperature of current setting
P Battery use indicator
Q Profile of today’s program
S Current time
Description of the wall-mounted
receiver
The wall-mounted receiver is easily and discreetly
installed close to the boiler.
It receives run/stop commands from the ambient
thermostat EK560 and transmits these to the boiler
via a wired output.
Wall-mounted receiver description
vue 30-30°
A Push-button operation T
B Operating indicator.
This lamp is illuminated when the receiver
output contact is closed = ON.
C Coding indicator. This lamp flashes during
coding operations.
D Bouton configuration R
fct
cfg
fct
LED
cfg
LED
LED
fct
cfg
fct cfg
EK560
1 6LE001012C
The transmitter + receiver assembly is
paired in the factory and is, therefore,
immediately ready to use.
It is not useful to reconfigure
the radio links.

hager EK560 Specifications

General

Quantity	1

Summary

Product Overview: EK560 Thermostat and Receiver

Thermostat Description and Controls

Explains the thermostat's functions, temperature levels, and visual interface.

Wall-Mounted Receiver Description

Details the receiver's role, indicators, and buttons.

Installation and Initial Setup

Thermostat and Receiver Installation

Guidance on physical mounting and wiring for the thermostat and receiver.

System Connection Diagrams

Visual guides for connecting the thermostat to boilers, heat pumps, and circulators.

Initial Adjustment and Updating

Steps for setting year, date, time, and automatic daylight saving time.

Operating Modes and Installer Configuration

Thermostat Operating Modes

Explains automatic, manual, and standby modes for thermostat operation.

Installer Parameters (PR:1-PR:9)

Configuration of core functions: override, backlighting, calibration, modes, and regulation types.

Receiver LED Status Indicators

Explains the meaning of receiver LED lights for ON/OFF and coding status.

Advanced Settings and Specifications

User Parameters and Advanced Installer Settings

User adjustments and further installer configurations like factory reset and radio links.

Technical Characteristics

Detailed specifications for the transmitter and receiver, including power and dimensions.

Transmitter-Receiver Pairing

Step-by-step procedure for establishing radio communication between devices.

Programming and Advanced Features

Heating;Air-Con Reversibility and Programming

Switching modes, and introduction to pre-set and custom weekly heating programs.

Link Management and Temperature Adjustments

Procedure for deleting links, factory reset, and modifying temperature set-points.

Holiday Mode Operation

How to protect the home by maintaining a minimum temperature during absences.

Customization, Troubleshooting, and Compliance

Creating Custom Programs (P4)

Detailed guide for creating personalized daily heating and cooling schedules.

Temporary Overrides and Troubleshooting

Making temporary adjustments and resolving common operational issues.

Regulatory Compliance and Disposal

Information on CE compliance, safety, and environmentally responsible product disposal.