Operation
6
A human sensor is used to detect changes in the infrared radiationemitted by
human bodies. In case of the following conditions, the detection may not be
accurate:
temperature
objects due to the wind.
sharply.
Besides, if a person is at the border of two or three air blowing areas, If a person
stands between two air blowing areas, following air will be sent to these two areas
respectively or be swept automatically. The avoiding air will avoid these two areas
or be swept automatically.
Unit will start running to reach the
temp. setting on LCD.
AN Operation
changes as follows:
Unit will run at selected fan speed.
button.
pressed, temp. setting
increases 0 .5 ºC.
pressed, temp. setting
decreases 0 .5ºC.
1
2
changes as follows:
1
cancel
CO ILO CO ILO
CO ILO
QUIET/
TURBO
QUIET/
TURBO
SELF
CLEAN
SELF
CLEAN
To Next Page
Loading...
