Haier AS09DCBHRA - Airflow Direction and Timer; Swing Operation; Timer Operation

S W IN G Operation
To cancel TIM ER mode
J ust press APPLY button TIM ER dispiay disappear.
Operation
TIM ER
Set Clock correctly before starting Timer operation. You can
let unit start or stop automatically a following times: Before
you wake up in the morning, or get back from work or
after you fall asleep at night.
mode.
Time setting.
Remote controller: “
TIMER ON
”
Remote controller: “
TIMER OFF
”
“
ON
” or “
OFF
”
Every time the button is pressed,
time setting increases or decreases
Select your desired
TIM ER ON.
Select your desired
TIM ER OFF.
TIM ER Operation
1
1
2
1 min, if kept depressed, it will increase rapidly. It can be
adjusted within 12 hours.
APPLY
Select your desired operation
3
COOL/DRY:
For each press of “
” button, air
displays as follows according to
different operation modes:
When humidity is high, condensed water might occur
at air outlet if all vertical louvers are adjusted to left or
right.
position for a long time in COOL or DRY mode,
otherwise, condensed water might occur.
1
2
HEAT:
SM ART:
Initial state
Initial state
For each press of “
” button, remote controller
displays as follows:
remote controller:
8
.