DISASSEMBLY
7. Installing Bottom T
rim
Open the door of refrigerator compartment and
take out the bottom trim. Fasten it to the
bottom of refrigerator with screws as illustrated.
Take out the accessory bag containing the legs from the refrigerator compartment. Get the
legs to be installed. The appliance should be given a tilt by one person and the legs should
be installed as illustrated into the reserved holes by the other person.
I
8. Installing Legs
Leg
Reserved
hole
9. Height-adjustable Shelf
The height of shelf can be adjusted to meet your storage
needs.
To adjust the shelf height, remove the shelf first. The steps are
as follows:
tilt the shelf up at front, and lift it up and out of
tracks. To replace the shelf,
with shelf front
raised slightly,
engage the lugs in tracks. Then lower shelf front until it locks
into position.
Lift and remove
Tilt up
To remove
Engaged the lugs
To replace
To Next Page
Loading...
Need help?
General
