DISASSEMBLY
15. Replacing the Light Bulb
Bulb specifications: 220V~, 25W
Socket: E14 (DO NOT use a bulb over 25W)
To replace the light bulb:
1. Unplug the appliance.
ķRemove the front screw with a screwdriver.
ĸTo remove the light shield, press the stopper at front
ǂout of the square hole.
ĹPull the shield forward until the retainer is separated ǂ
from the square hole.
2. Turn the bulb anticlockwise and out. Replace a bulb of
the same specifications in the reverse sequence of
removal.
3. To replace the light shield: Engaged the retainer into the
square hole and then press the shield front backward
until the stopper is locked in the square hole. Replace
and tighten the screw.
Screw hole
Square
hole
Freezer light socket
Stopper
Retainer
Freezer light bulb
16. How to User the Crisper
The appliance is equipped with a crisper for vegetable and fruit
storage. You can set the humidity to meet your storage needs.
1. Turn the humidity regulator (located at the upper right
corner of the crisper) up to get a higher humidity suitable for
storage of cucumber, grape, kiwifruit and persimmon etc.
2. Turn the humidity regulator (located at the upper right
corner of the crisper) down to get a lower humidity suitable
for storage of strawberry, orange, bean, garlic, watermelon,
plum and tomato etc.
Up
Down
Humidity regulator
17. How to Use the Delicatessen Drawer
The appliance is equipped with a delicatessen drawer with a
temperature range from -2°C~+3°C. The temperature can be
adjusted by the air control knob to meet your storage needs.
1. Turn the air control knob leftwards (weak) to reduce the cooled
air moving in the delicatessen drawer and maintain a higher
temperature;
2. Turn the air control knob rightwards (strong) to increase the
cooled air moving in the delicatessen drawer and maintain a
lower temperature.
Air control knob
cold
colder
cold
colder
Humidity
High
Low
Humidity
High
Low
To Next Page
Loading...
Need help?
General
