Installation
Door reversibility
Before connecting the appliance to the power supply, you should check whether the door
swing must changed from right (as delivered) to left, as required by the installation loca-
tion and the usability.
WARNING!
▶ The appliance is heavy. You need two persons to carry out the door reversibility.
▶ Before any operation, rst unplug the appliance from the mains .
▶ Do not tilt the appliance more than 45° to prevent damage of the cooling system.
1. Locate necessary tools.
2. Unplug the appliance.
3. Remove the xation of the cover.
4. Remove the faceplate of the body.
5. Remove the top-plate of the upper door.
6. Remove the hinge cover.
7. Unplug the connection cable.
8. Unscrew the upper hinge.
9. Lift the loose upper door carefully o the lower
hinge.
10. Turn the upper door upside down and change the
position of the hinge barrel on the lower side of
the door.
11. Change the door stop from the current position
to opposite side.
12. Unscrew the lower hinge of the upper door.
1. 2.
3. 4.
5.
To Next Page
Loading...
