POWER
POWER Operation
When you need rapid heating or cooling, you can use this function.
Selecting of POWER operation
Press POWER/SOFT button. Every time the button is pressed,display
changes as follows:
Stop the display at
SOFT
BLANK
In HEAT mode, fan speed automatically runs in HI mode
for 15 min then returns to original status setting.
Press POWER/SOFT button twice ,POWER/SOFT disappears.
In POWER operation status:
To cancel POWER operation
SOFT Operation
You can use this function when silence is needed for rest or reading.
In SOFT operation mode, fan speed automatically takes"LOW"
POWER
Press POWER/SOFT button. Every time the button is pressed,display
changes as follows:
Stop the display at
SOFT
BLANK
Selecting of SOFT operation
Press POWER/SOFT button once ,POWER/SOFT disappears.
To cancel SOFT operation
Hints:
During POWER operation, in rapid HEAT or COOL mode, the room
will show inhomogeneous temperature distribution.
Long period SOFT operation will cause effect of not too cool
or not too warm.
In COOL mode, fan speed automatically runs in MED mode
for 15 min then returns to original status setting.
Power/Soft Operation
Operation
Remote Controller
To Next Page
Loading...
Need help?
General
