Press MODE button. For each press, operation mode
changes as follows:
Then select COOL or DRY operation
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
3.Select temp.setting
Cool/Dry mode Operation
Link with electric power.
The liquid crystal will display the working state of last
time (Except Timer, Power/Soft ).
Operation
Remote Controller
1. Unit start
2. Select operation mode
5. Unit stop
4. Fan speed selection
Press ON/OFF button, the unit stops.
Press ON/OFF on the remote controller, unit start.
Remote controller:
Air conditioner is running under displayed fan speed.
Press FAN button. For each press, fan speed changes
as follows:
Remote controller:
When FAN is set to AUTO,the air conditioner
automatically adjusts the fan speed according to room
temperature.
DRY HEATCOOL
LOWHI MEDAUTO
8
To Next Page
Loading...
Need help?
General
