1.In case washing 1 piece of laundry(carpet, bed sheet,table sheet,ect) make it
symmetrical inside the drum.
2.Lower the wet weight of laundry pieces by wringing manually and placing them
back in the drum in symmetrical position.
3.Take out and then reposition the laundry piesces inside the washing machine in
a more balanced position on the inner wall of the drum.
4.Add 1 or 2 pieces of laundry into the durm to reduce the unbalanced load effects.
5.Restart the spin cycle by cloosing spin programme.In case the failure persists,
please ask a qualified technician to repair it.
Washing machine has an unbalanced load
protection function.When unbalanced weight
is greater than allowable maximum,the
washing machine will not spin and will run
at a speed to avoid abnormal vibration and
noise.
To Next Page
Loading...
Need help?
General
