What to do if my Haier HW70-BP1439N shows error E4?
If your Haier Washer displays error code E4, it indicates that the water level has not been reached or the drain hose is self-syphoning. Ensure the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
How to fix E2 error on Haier HW70-BP1439N Washer?
The E2 error on your Haier Washer means there's a lock error. Ensure you shut the door properly.
General| Load Capacity | 7 kg |
|---|---|
| Spin Speed | 1400 RPM |
| Energy Rating | A+++ |
| Weight | 64 kg |
| Loading type | Front load |
| Energy efficiency class | A+++ |
| Noise level spinning | 74 dB |
| Depth | 46 cm |
| Type | Freestanding |
| Motor Type | Inverter |
| Child Lock | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Wash Programs | Baby Care, Anti-Allergy |
| Delay Start | Yes |
| Dimensions (W x D x H) | 60 x 45 x 85 cm |
To Next Page
