Why is my Haier HW70-B12636N not spinning?
If your Haier Washer fails to spin, the laundry may be unbalanced. Check the machine load and laundry, redistribute the items in the drum, and then try running the spin program again.
Why does my Haier Washer show error E2?
If your Haier Washer displays error code E2, it indicates a lock error. Make sure that you shut the door properly.
What to do if my Haier HW70-B12636N Washer shows error E4?
If your Haier Washer displays error code E4, it indicates that the water level has not been reached or the drain hose is self-syphoning. Ensure the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
Why does my Haier Washer show CLR FLTR?
The CLR FLTR error on your Haier Washer indicates a drainage error. Check the drain hose installation.
How to fix E2 error on Haier HW70-B12636N?
The E2 error on your Haier Washer means there's a lock error. Ensure you shut the door properly.
What to do if my Haier Washer shows 'UnB' error?
If the Haier Washer displays the error code 'UnB', it indicates an unbalanced load. To resolve this, stop the washer, redistribute the laundry evenly inside the drum, and consider reducing the load size. Then, restart the washing machine.
Why is there so much foam in my Haier HW70-B12636N?
If your Haier Washer is producing excessive foam, which is causing the drum or detergent drawer to float, it could be due to using an inappropriate detergent or using too much detergent. Make sure you are using a detergent that is recommended for washing machines. Also, reduce the amount of detergent you are using per load.
Why is my Haier HW70-B12636N Washer leaving my clothes dirty?
If your Haier Washer is not washing clothes properly, it might be because the selected wash program doesn't match the level of dirt on your clothes. Try choosing a different program that's more suited for heavily soiled items. Also, make sure you're using enough detergent for the load size and dirt level, following the detergent manufacturer's instructions. Avoid overloading the machine and ensure laundry is distributed loosely in the drum.
Why does my Haier HW70-B12636N leave white residue on clothes?
If you see white spots on your clean laundry after washing in your Haier Washer, these could be insoluble particles of detergent. Try performing an extra rinse cycle to remove them. You can also try brushing the spots off the dry laundry. Alternatively, consider switching to a different brand or type of detergent.
What to do if my Haier Washer shows 'E4' error?
If your Haier Washer displays the error code 'E4', it means the water level was not reached or the drain hose is self-syphoning. Ensure the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
Essential safety checks and handling advice before operating the washing machine for the first time.
Important safety instructions for operating the appliance during daily use, including child safety.
Safety measures to follow when cleaning and maintaining the washing machine, emphasizing electrical disconnection.
Safety advice for installing the washing machine in a suitable location and connecting it properly.
A table detailing various wash programmes with load capacity, temperature, spin speed, and functions.
Instructions for connecting the appliance to the power supply and water source.
Steps for adding detergent, switching on, selecting programmes, and making individual selections.
Meanings of information codes and common error codes with their causes and solutions.
Solutions for other display codes like FR, F3, F4, F7, FCO, FC1, FC2, and Unb.
Solutions for common problems like machine not operating, not filling, draining issues, or vibration.
Solutions for issues like foam, unbalance, poor washing results, and handling power outages.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Motor type | Beltless |
| Water fill | Cold |
| Drum volume | 45 L |
| Control type | Rotary, Touch |
| Display type | LED |
| Loading type | Front-load |
| Tub material | Plastic |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Illumination color | Amber |
| Appliance placement | Freestanding |
| Drum capacity | 7 kg |
| Cycle time (max) | 206 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1200 RPM |
| Noise level (spin) | 67 dB |
| Number of washing programs | 16 |
| Add garment (pause) function | No |
| Annual water consumption washing | 9000 L |
| Annual energy consumption washing | 106 kWh |
| Power plug type | Type F (CEE 7/4) |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 41 L |
| Energy consumption washing per cycle | - kWh |
| Package depth | 565 mm |
| Package width | 650 mm |
| Package height | 890 mm |
| Package weight | 70000 g |
Weight and Dimensions| Depth | 510 mm |
|---|---|
| Width | 590 mm |
| Height | 850 mm |
| Weight | 64000 g |
To Next Page
