Why won't my Haier HW70-B12CIN start?
Your Haier Washer might not start due to several reasons. Ensure that the programme is properly set and started, the door is completely closed, and the machine is switched on. Also, check the power supply and deactivate the child lock if it's enabled.
How to stop my Haier HW70-B12CIN Washer from vibrating so much during spinning?
Excessive vibration in your Haier Washer during spinning can be due to a few reasons. Make sure all transportation bolts have been removed from the appliance. Ensure the appliance is on solid, level ground. Also, check that the machine load is correctly balanced and not overweight.
How do I fix a drainage failure in my Haier HW70-B12CIN Washer?
A drainage failure in your Haier Washer may occur if the drain hose is blocked or improperly installed. Ensure that the drain hose is correctly installed and not higher than 100 cm.
What to do if my Haier HW70-B12CIN is draining improperly?
If your Haier Washer is draining improperly, it might be because the drain hose is not correctly positioned. Ensure the drain hose is properly installed and that its height is at least 80 cm. Also, make sure the drain hose end is not submerged in water.
Why does my Haier Washer stop mid-cycle?
If your Haier Washer stops before completing the wash cycle, it could be due to a water or electric failure. Check both the power and water supply to ensure they are functioning correctly.
General| Model | HW70-B12CIN |
|---|---|
| Capacity | 7 kg |
| Maximum spin speed | 1200 RPM |
| Width | 595 mm |
| Height | 850 mm |
| Child Lock | Yes |
| Delay Start | Yes |
| Quick Wash | Yes |
| Color | White |
| Loading type | Front Load |
To Next Page
