EasyManuals Logo

Haier HW80-B1486 User Manual

Haier HW80-B1486
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
0
5
BEF
O
RE
US
E
SAFETY INSTRUCTIONS
DO ...
... Make sure that the transport bolts are removed before use.
... Make sure that all packing materials have been removed..
... Make sure that the fuses in the power circuit are rated for 13A.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable whenplugging in,
... Keep away from heat sources and direct sun light to prevent
... Make sure that the power cable is not caught or trapped
DO ...
... Pull up zips and fix loose threads to prevent the items
...
... Turn off the washing machine after each wash program,
... Keep the door slightly open when the washing machine
... Ensure the power cable is replaced by the manufacturer,
Check there are no coins, hair clips in the laundry and
... Ensure that the washing machine is not used by persons
DO NOT ...
... Touch or use the washing machine when barefoot or with
... Use flammable detergent or dry cleaning agents.
... Use any flammable sprays in close vicinity to the washing
... Remove or insert the plug in the presence of flammable gas.
... Allow children or infirm persons to play with the appliance
... Install the washing machine outdoors in a damp place, or
... Place the washing machine directly on a carpet, or close to a
DO NOT ...
... Touch the washing machine door during the washing
... Place objects or sources of heat or damp on top of the
... Hot wash foam rubber or sponge-like materials.
... Open the soap detergent distribution drawer during the
... Force the washer door open during the wash cycle.
... Open the washer door if the water level is visibly over
... Cover the washing machine with plastic cover so that
BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
DURING DAILY USE OF THE APPLIANCE
unplugging the power supply.
plastic and rubber components from aging.
under, or in the machine to avoid damage to the power cable.
... Check that hose joins and connections are secure and there
are no water leaks. If joints are loose or there is a leak, turn off the
water supply and tighten or remake the connections to stop the leak.
Do not use the washing machine until the hoses are properly secured
and free of any water leaks.
... Check the water inlet or drain hoses are not folded trapped
or kinked.
wet or damp hands or feet.
machine.
or packing materials.
in an area which may be prone to water leaks such as under or near
a sink unit. In the event of a water leak allow the machine to dry
wall or furniture.
naturally.
from being entangled. If necessary, put small items into a net bag
or pillow.
empty all pockets.
and switch it off at the mains to save electricity and for safety.
Wipe clean the lower part of the porthole.
is not in use to prevent formation of odours.
his service agent or other qualified persons, if it is damaged.
with reduced physical, sensory or mental capabilities, lack of
experience and knowledge without supervision or instruction by
a person responsible for their safety.
...
Supervise children to ensure that they do not play with
process – it can get hot!
appliance.
wash cycle.
The door is fitted with a self-locking device. The door will unlock
and can be opened shortly after the wash program has ended.
the porthole.
condensation inside the machine cannot escape.
the washing machine.

Other manuals for Haier HW80-B1486

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HW80-B1486 and is the answer not in the manual?

Haier HW80-B1486 Specifications

General IconGeneral
Current10 A
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (typical)2000 W
Water consumption per cycle- L
Energy consumption washing per cycle- kWh
Washing classA
Annual water consumption washing11440 L
Annual energy consumption washing186 kWh
Display typeLCD
Loading typeFront-load
Product colorWhite
Built-in displayYes
Appliance placementFreestanding
Inverter technologyNo
Drum capacity8 kg
Delay start (max)24 h
Spin-drying classB
Maximum spin speed1400 RPM
Noise level (spin)74 dB
Noise level (wash)53 dB
Number of washing programs12
Package weight78000 g
Weight and Dimensions IconWeight and Dimensions
Depth650 mm
Width595 mm
Height850 mm
Weight74000 g

Related product manuals