English
8
UNPACKING YOUR APPLIANCE
WARNING: Two or more people may be needed to install and move the appliance.
Follow the procedure below to unpack your washer remove packing materials.
As shown in the figure, remove all the packing materials. Upon opening of the package,
water drops may be seen on the plastic bag and the porthole. This is a normal phenomenon
resulting from water tests in the factory.
NOTE: 1. A bottom cover is wrapped in the stepper.
2. Be careful while handling the bottom cover.
3. Remove all anti-scratch film from the washer.
WARNING: To avoid danger of suffocation, please keep the package bag and
the accessories bag away from children.
1-Base (1)
2-Front post (2)
3-Sleeve (1)
4-Stepper (1)
5-Back pad (2)
6-Spacer Pad (2)
7-Back Post (2)
8-Package carton(1)
9-Adhesive tape (2)
10-Package bag (1)
To Next Page
Loading...
Need help?
General
