Panel
PAL-B/G , I , D/K
PAL/SECAM/MPEG2/MPEG4/H.264
AC 150
-
240 V 50/60Hz
Analog RGB(PC) x1; PC audio x1
Composite Input x 1
YPbPr x 1
SCART Input x 1
75W
42“
CI x 1
USB x 1
RF x 1
Composite video input >=350
YPbPr >=400
Headphone x 1
TV System
Video Signal System
Input Power Voltage
Power consumption
Standby Power consumption
Audio Output Power (THD 7%)
Signal Input
Signal output
(TV line)
SECAM-B/G , D/K , L ,
≤0.5W
DVB-T, DVB-C
INSTALLATIONCAUTION
*Locate the TV in the room where light does
not strike the screen directly.
screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable
viewing.
*Allow enough space between the TV and the
wall to permit ventilation.
*Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
*Do not cover the ventilation openings when
using theTV.
Main parameter
Main features
5 NICAM
4
6 Time shift/Record
3
High luminance, wide
viewing
angle
2
Used as Television, display terminal,
PC display
1
Never tamper with any components inside the
TV, or any other adjustment controls not
described in this manual. All LED-TV's are high
voltage electrical equipment.
SCREEN or CABINET or around any of the
buttons or connectors, the power cabled should
be removed from the power socket. Wipe the TV
with a soft, dry, dust free cloth.
During thunderstorms, unplug the power cable
and aerial / antenna cable to prevent damage to
your TV and any other devices connected to it.
All repairs to this TV should only be performed
personnel.
02 Introdution
Introduction
EN-5
≥400CH(DTV);100CH(ATV)Storage channel number
COAXIAL Output x 1
2x8W
HDMI interface support 4K*2K 3840*2160
signal input
SCART Interface