Haier LE42H6600CU User Manual

Base Stand Assembly Instruction
1. Place the TV with the display side down on a
t surface. Use a cloth to protect
.
the
display Position the stand base pillar onto the
bottom of the TV.
2. Attach the stand base plate to the stand pole
by ly tightening the supplied screws.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
re
ection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
Please do not attempt to rotate the TV on the stand.
Introduction
EN-7

Haier LE42H6600CU Specifications

General

Screen shape	Flat
Display diagonal	42 \
Display brightness	- cd/m²
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Direct-LED
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	4000000:1
Viewing angle, horizontal	170 °
Motion interpolation technology	Fast Refresh Rate (F2R) 600
3D	-
Annual energy consumption	81 kWh
Tuner type	Analog & digital
Number of tuners	1 tuner(s)
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-C, DVB-T
Internet TV	No
Audio system	Nicam
RMS rated power	20 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Product color	Black
Panel mounting interface	400 x 200 mm
Power consumption (standby)	0.5 W
Package depth	120 mm
Package width	1080 mm
Package height	670 mm
Package weight	11800 g

Weight and Dimensions

Depth (with stand)	200 mm
Height (with stand)	610 mm
Weight (with stand)	9800 g
Depth (without stand)	36 mm
Width (without stand)	936 mm
Height (without stand)	548 mm
Weight (without stand)	8800 g