33
7.2 FW Upgrade
Haier MTK5363 FW upgrade with USB SOP
Step 1: Ready for F/W Upgrade
1.1 Change the software file name to ” upgrade.pkg” ,eg:
Before change:
After change:
1.1 Prepare a USB memory (The file system of USB memory must be FAT16 or FAT 32).
1.2 Copy the file (upgrade.pkg) from your computer to the USB memory, and remove it from computer’s USB
port!
Note: 1). Note the version of this F/W is V2.03 before you change the software file name.
2). The software file name must be changed, or TV can’t detect the F/W.
Step 2: F/W Upgrade
2.1 AC on (Power plug Figure 2.1/2.2)
Figure 2.1 Figure 2.2
2.2. Plug the USB memory on the USB port on the side I/O port of TV. (Figure 2.3)
Figure 2.3
To Next Page
Loading...
Need help?
General
