41
Step5. Click “write EDID” to write EDID. If display “NG” in the yellow blank, which represent writing failly. Please
check the whether the connection of tool and cables is nomal and retry. Another way is to change a new ISP board
and retry.
1. Click here to write EDID.
2.”OK” re
resents writin
successfull
.
3. Click “Read EDID” can read
out the EDID info checked in
“Edid Content” interface.
We can know whether the
EEPROM is writeable by
clicking “Text EDID” before
writin
EDID.
To Next Page
Loading...
Need help?
General
