To Next PageTo Next PageWhy is my Haier Washer not filling with water?
If your Haier Washer isn't filling with water, make sure the water is turned on and that the water pressure is not less than 0.05MPa. Also, check the inlet hose for any kinks. Ensure there is no water supply failure, the program knob is properly set, and the door is properly closed.
How to fix a Haier XQG65-11SU Washer/Dryer that won't drain?
If water won't drain from your Haier Washer/Dryer, ensure the drain hose is properly connected. Also, check the drain hose position to ensure the top of the drain outlet is less than 4 ft (1.2 m) above the floor.
What to do if my Haier Washer does not function?
If your Haier Washer isn't working, check the power connection and for any power failures. Also, make sure the door is completely closed and that the machine is switched on.
What to do if my Haier Washer/Dryer has soap residue?
If you notice soap residue on your clothes after washing in your Haier Washer/Dryer, the detergent may not be dissolving properly in the water. Try checking the water temperature or adding the detergent as the wash tub is being filled with water, before loading your clothes.
How to prevent clothes from being too wrinkled in my Haier XQG65-11SU?
To prevent your clothes from being too wrinkled in your Haier Washer/Dryer, avoid improper sorting, overloading, and repeatedly washing in too hot water. Resort your load, and avoid mixing heavy clothes with light or delicate items. You may also need to wash in warm or cold water.
Why is my Haier Dryer working but not drying the clothes?
If your Haier dryer is running but your clothes aren't drying, consider these possibilities: * The unit may be overloaded; the dryer drum should only be half full. * The lint trap might be full; ensure it is clean and dust-free. * The dryer load may need to be resorted, separating heavy clothes from regular ones. * Bulky clothes may require repositioning during the cycle. * If clothes dry unevenly, a higher dry setting may be needed, or the clothes may need to be resorted.
What to do if my Haier Dryer is not drying clothes properly?
If your Haier Dryer is running but not drying clothes, the unit may be overloaded; the drum should be only half full. Ensure the lint trap is clean. You may need to separate heavy clothes from regular ones and reposition bulky items. If clothes dry unevenly, try a higher dry setting or resort the load.
Why is my Haier Washer/Dryer not working?
If your Haier Washer/Dryer isn't operating, start by checking if it's properly plugged in and the plug hasn't come loose. Ensure the electrical wall receptacle has the correct voltage. Also, check the circuit breaker and replace the fuse if needed. Make sure the unit isn't in 'Off' mode, the door is securely closed, and the control knob is correctly set. If the washer is overloaded, redistribute the clothes to re-balance the load. Note that in delicate or hand-washable cycles, the washer pauses, which is normal due to a short soak period.
Why is my Haier Dryer making noise when drying?
If your Haier Dryer is making noise when drying, it could be due to coins, loose change, buttons, or other heavy objects. Also, the dryer may need to be leveled evenly. Consult the Operating Guide for normal operating sounds.
What to do if my Haier Dryer does not operate?
If your Haier Dryer isn't starting, try these checks: * Ensure the unit is plugged in properly. * Check the circuit breaker and replace the fuse if needed. * Make sure the unit isn't in 'OFF' mode; press the 'ON' button. * Confirm that the door is fully closed.
General| Model | XQG65-11SU |
|---|---|
| Type | Washer/Dryer |
| Capacity | 6.5 kg |
| Spin Speed | 1100 RPM |
| Energy Efficiency Class | A+++ |
| Noise Level (Washing) | 58 dB |
| Loading type | Front-loading |
| Dimensions (W x D x H) | 600 x 600 x 850 mm |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
Detailed identification and explanation of the washer's external components and controls.
Guide to using power, cycle selectors, load levels, and specific wash cycle descriptions.
Understanding water temperature settings and operating the clothes dryer function.
Instructions for cleaning lint trap, button trap, casters, and general cabinet care.
Guidance on moving, storing the appliance, and resolving common operational issues.
List of tools and accessories needed for the appliance installation.
Steps for removing packing materials, shipping bolts, and leveling the washer.
Instructions for connecting water inlet hoses and the drain hose to the appliance.
Guidance on proper electrical hookup, grounding, and unit dimensions.
