HALNy HL-1GE - Troubleshooting

HALNy HL-1GE Quick Installation Guide
9
4 Troubleshooting
Symptom
Solution
The POWER
indicator is not on
 Check whether the power connection is correct,
 Check whether the power adapter matches the
device.
The PON indicator is
not on
 Check whether the SN of ONU matches OLT,
 Check whether the optical attenuation is in the normal
range.
The LOS indicator is
not on
 Check whether the optical fiber cable is properly
inserted,
 Check whether the optical fiber connector is clean.
The LAN indicators
are not on
 Check whether the PC NIC is enabled,
 Check whether the network cables included in the
device package are used,
 Check whether the network cable connection is
normal,
 Check whether the indicator of the network adapter is
on,
 Check whether the network adapter works in the
normal state.