The chainsaw is equipped with an auto-return feature. When the control button is released, the saw
will automatically return to its home position. BEWARE OF THIS FEATURE WHEN WORKING
SHUT OFF ENGINE WHENEVER PERFORMING CLEAN-OUT OR SERVICE WORK.
Attempting to go around or defeat these auto-return features to gain access to an area of the machine
can result in serious injury or death.
Ensure all personnel are safely out of the way when operating the firewood processor and make sure
that no one is in line with the chain saw.
KEEP PEOPLE AWAY FROM THE CHAIN SHOT AREA. SERIOUS INJURIES AND DEATH HAVE BEEN
REPORTED WHEN HIGH SPEED CHAIN SAW COMPONENTS SEPARATE AND BECOME HIGH SPEED
Know where all personnel are around the skid steer at all times. The splitting function often produces
dangerous flying debris and wood particles. KEEP PEOPLE AT LEAST 50 FEET AWAY FROM THE MACHINE
LEFT BUTTON HARNESS RIGHT BUTTON HARNESS
When Processor is not in use, disconnect power cord or it could drain your battery
and shorten the life of your electrical components.
CONTACT HALVERSON WOOD PRODUCTS OR YOUR DEALER BEFORE ADJUSTING ANY VALVES!
OPTIONAL CAB HARNESS KIT CONTROL DIAGRAM HWP-120
www.HalversonWoodProducts.com
218-587-2065
To Next Page
Loading...