Hama DIR3200SBT - Manual Configuration of Network Connection - Wireless (WLAN); View Settings; Network Profile

22
• Select the relevant network prole and press [POWER/
VOLUME/ENTER/NAVIGATE] (11) to remove it.
• Conrm the prompt querying if you want to delete
the network prole with YES.
• A prole that is currently active, or that is in use,
cannot be deleted.
Note
• Before giving or selling the radio to someone else,
we recommend performing a factory reset.
• This will completely and permanently delete all network
information and connections stored on the device.
Time/Date settings
To access the time settings, proceed as follows:
• Press [
] (7) to go to the system settings.
• Use [POWER/VOLUME/ENTER/NAVIGATE] (11)
to navigate to the "Time and date" menu item.
• Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (11).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (11)
to navigate to the "Update settings" menu item.
Auto update
Update from Internet
Choose this option to set the time and date automatically
from the internet. Set the timezone of your current location
(Set timezone) and, if desired, turn on automatic
adjustment between summer time and winter time
(Daylight savings -> ON).
Update from DAB/FM
If automatic time and date adjustment is activated, the
device receives time and date information from the station
over the FM/DAB/DAB+ radio network. This is the best way
to ensure that the clock will run accurately and the alarm
will trigger at the correct time, even after power outages.
No update
The time and date (DD-MM-YYYY) must be set manually;
no automatic calibration takes place.
Time/Date settings
Set the date (DD-MM-YYYY) and time (hh:mm) manually
using [POWER/VOLUME/ENTER/NAVIGATE] (11).
Format
Choose between 12 and 24 hours format.
16.3 Language
The rst time it is used, the radio's default language is English.
To change radio's menu language, proceed as follows:
• Press [
] (7) to access the Settings menu.
• Use [POWER/VOLUME/ENTER/NAVIGATE] (11)
to navigate to the "Settings" menu item.
• Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (11).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (11)
to navigate to the "Language" menu item. Conrm
the selection by pressing [POWER/VOLUME/ENTER/
NAVIGATE] (11).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (11)
to select your preferred system language.
• The language setting currently selected is marked
with an asterisk (*).
Note
• The following languages are available:
English, Danish, French, German, Italian, Norwegian,
Finnish, Swedish, Turkish, Polish, Dutch, Portuguese,
Spanish
16.4 Factory reset
To reset the radio to the factory default settings, proceed
as follows:
• Press [
] (7) to go to the system settings.
• Use [POWER/VOLUME/ENTER/NAVIGATE] (11)
to navigate to the "Factory settings" menu item.
• Conrm the following prompt with YES to reset the
radio to the factory default settings. All settings made
previously are deleted.
• To abort the deletion process, press [
] (10) or select NO.
Note
Resetting to the factory default settings can remedy
some problems and malfunctions.
• However, all settings made previously, such as equaliser
and favourites, permanently deleted.