Need help?Do you have a question about the Hameg HM1507-3.02 and is the answer not in the manual?
General| Type | Oscilloscope |
|---|---|
| Bandwidth | 150 MHz |
| Channels | 2 |
| Sample Rate | 1 GSa/s |
| Timebase | 5 ns/div to 50 s/div |
| Input Coupling | AC, DC, GND |
| Max Input Voltage | 400 V (DC + AC peak) |
| Power Supply | 100 - 240 V AC, 50/60 Hz |
| Display | Color LCD |
| Trigger Modes | Edge, Pulse, Video |
| Trigger Sources | Line |
| Vertical Resolution | 8 bit |
| Input Impedance | 1 MΩ |
| Time Base Range | 5 ns to 50 s |
| Probe | 1:10 |
Technical characteristics and performance parameters of the oscilloscope.
Covers symbols, tilt handle, EMC, warranty, maintenance, power, and protective switch-off.
Critical safety precautions and guidelines for operating the oscilloscope.
Explains voltage types, measurement, coupling, and amplitude conventions.
How to measure time intervals, periods, and frequencies using the oscilloscope.
How to connect signals and set up the oscilloscope for measurement.
Overview of front panel controls, buttons, knobs, and their functions.
Overview of the oscilloscope's menu system, submenus, and items.
Initial setup, power-on, basic adjustments, and trace display.
Explains Yt mode, X-Y mode, ADD mode, and Lissajous figures.
Using the built-in component tester for diagnostics and test patterns.
Features and operation of the digital storage oscilloscope capabilities.
Procedures for recalibration and temperature compensation.
Connecting and controlling the oscilloscope via a PC interface.
To Next Page
