Need help?Do you have a question about the Hameg HM1004 and is the answer not in the manual?
General| Type | Oscilloscope |
|---|---|
| Bandwidth | 100 MHz |
| Channels | 2 |
| Sample Rate | 1 GSa/s |
| Input Coupling | AC, DC, GND |
| Max Input Voltage | 400 V (DC + AC peak) |
| Interface | USB, LAN |
| Trigger Modes | Edge, Pulse, Video |
| Display | 7-inch Color LCD |
| Input Impedance | 1 MOhm || 15 pF |
| Vertical Resolution | 8 bits |
| Power Supply | 100-240 V AC |
Formal declaration of conformity to EU directives and applied standards.
Explanation of HAMEG's adherence to EMC and Low-Voltage directives.
Specifications for vertical/horizontal inputs, bandwidth, sensitivity, and time bases.
Details on instrument operation, controls, readout, cursors, and misc. specs.
System block diagrams illustrating the oscilloscope's functional architecture.
Schematics and layouts for AT, MB, YF, FC, and IF boards.
Schematics and layouts for Readout and CRT boards.
Schematics and layouts for Processor and PS boards.
Tables detailing timebase A and B control settings for various time scales.
Reference list of signals, their meanings, types, and associated boards.
Important safety warnings and prerequisites for performing adjustments.
List of necessary test equipment for calibration and adjustment procedures.
Detailed procedures for calibrating various oscilloscope functions and parameters.
To Next Page
