Need help?Do you have a question about the Hameg HMO1024 and is the answer not in the manual?
General| Brand | Hameg |
|---|---|
| Model | HMO1024 |
| Category | Test Equipment |
| Language | English |
Covers analog channel settings like coupling, sensitivity, and bandwidth.
Explains trigger modes, sources, slopes, and levels.
Covers time base, zoom, and capture modes.
Details operation modes, save/recall, and interface options.
Outlines critical safety measures for operating the oscilloscope.
Explains the different areas and soft keys of the control panel.
Explains the general principles of instrument operation and menu navigation.
Details the internal self-alignment process for accuracy.
Guide to using cursors for precise signal measurement.
Utilizing the instrument's auto-measurement functions for quick analysis.
Applying mathematical operations to signal data.
Adjusting vertical gain, position, and DC offset for signal display.
Exploring different modes for capturing and displaying signals.
Using the zoom feature to analyze signal details.
Locating specific events or patterns within captured signals.
Setting up triggers based on signal slope characteristics.
Configuring triggers for specific pulse widths and ranges.
Setting up triggers for digital logic signals.
Using cursors to measure signal parameters like voltage, time, and ratios.
Utilizing built-in functions for automatic signal parameter measurements.
Performing calculations and analysis on signal data.
Analyzing signal frequency spectrum using Fast Fourier Transform.
Testing signals against predefined masks for compliance.
Detailed analysis of the I2C serial bus protocol.
Analyzing parallel bus communication.
Analyzing SPI and SSPI serial bus protocols.
Analyzing UART and RS-232 serial bus protocols.
Analyzing CAN serial bus protocols.
Analyzing LIN serial bus protocols.
To Next Page
