Need help?Do you have a question about the Hameg HMO2022 and is the answer not in the manual?
General| Brand | Hameg |
|---|---|
| Model | HMO2022 |
| Category | Test Equipment |
| Language | English |
Specifications for analog and logic channels, input impedance, and bandwidth.
Details on trigger modes, sources, slope, and filter settings.
General safety precautions and compliance information.
Guidelines for proper use and intended environment.
Basic principles for operating the instrument and its functions.
How to configure language, system settings, and access help functions.
Procedure for updating firmware, help files, and languages.
How to install and activate software options using license keys.
Procedure for internal self-alignment to ensure accuracy.
Initial steps for powering on and preparing the oscilloscope.
How to connect a probe and capture a basic signal.
Method for using cursors to measure signal parameters.
Using auto-measure functions to display signal parameters.
Applying mathematical operations to signals.
Procedures for saving instrument settings, signals, and screenshots.
Adjusting vertical gain, position, and DC offset.
Selecting between continuous capture and stopping data acquisition.
Adjusting the time base speed and trigger position.
Overview of different signal capture modes like Refresh, Roll, Envelope, Average.
Using the zoom feature to analyze signals in detail.
Searching for specific events like slopes, pulses, or peaks.
Selecting basic trigger modes for signal acquisition.
Setting up triggers based on signal slope characteristics.
Triggering based on specific pulse widths or ranges.
Using cursors to measure signal parameters like voltage, time, and ratios.
Utilizing automatic measurements for signal parameters like mean, RMS, and frequency.
Performing mathematical operations on signals using Quick Math or Formula Editor.
To Next Page
