Document #101-0204 4 10/21/2011
I. Introduction
This manual will describe the installation of the Hamilton Transaction Kisok from a mechanical and
electrical perspective.
Automatic / Rollover
• Brick in Mounting
• Schematic drawing of mounting confi guration of HTK
• Schematic drawing of cabinet dimensions
• Schematic drawing of conduit mounting holes
• Schematic of HTK wiring connections
Tunnel / Gated
• Schematic drawing of mounting confi guration of HTK
• Schematic drawing of positioning of HTK and Gate
• Schematic drawing of cabinet dimensions
• Schematic drawing of conduit mounting holes
• Schematic drawing of wiring connections for HTK, Gates and Gated
PLC
NOTE: Website links to Gate and Loop information is provided on
page 24.
*IMPORTANT NOTICE: HAMILTON MFG. RECOMMENDS
THAT THE HTK OPERATE ON A DEDICATED POWER
SOURCE. UNDER NO CIRCUMSTANCE SHOULD ADDI-
TIONAL EQUIPMENT BE OPERATING OFF THE DEDICAT-
ED POWER SOURCE FOR THE HTK.
To Next Page
Loading...
