Need help?Do you have a question about the Hamilton XE and is the answer not in the manual?
General| Brand | Hamilton |
|---|---|
| Model | XE |
| Category | Bank Note Validator |
| Language | English |
Explains the required OFF position for proper validator function.
Explains ON/OFF for Tokenotes® usage and rejection.
Selects stacker control signal source for pulse mode.
Explains OFF position unless Hamilton Dual Stacker is used.
Details the pin assignments for external view and wire view connections.
Defines signals for serial data and stacker control via the display board.
Outlines procedures for monthly cleaning of the platen assembly and components.
Recommends annual servicing by a trained technician for maximum performance.
Step-by-step guide to calibrating the validator's optical sensors.
Step-by-step guide to calibrating the validator's side scan sensors.
Explains how diagnostic codes are displayed on the unit's segment display.
Troubleshooting guide for errors related to Tokenote programming.
Troubleshooting guide for errors encountered during standard bill operation.
Defines the operation of five additional diagnostic lights for the XE Smart Validator.
To Next Page