Hammer 4+ - Radio; Calendar; Bluetooth

© 2018 mPTech. All rights reserved. HAMMER 4+
16
Radio
Listening to FM radio does not require headphones with a 3.5 mm mini-jack plug
to be plugged into the headphone jack, but they do help when the reception of the
station is weak - they act as an additional antenna.
Enter [Menu] > [Multimedia] > [FM Radio]. Enter [Options] > [Auto search] > <Select>
and confirm "Auto search and save channels". All found radio stations will be saved
and available at [Options] > [Channel list]. Radio volume controle is done by <+> and
<-> buttons situated at the left side of the phone Radio control is done using the
following buttons:
Key
Function
<OK>
Turning the FM Radio On/Off
<up>
Change frequency by 0.1 MHz up or search for the next channel
up.
<down>
Change frequency by 0.1 MHz down or search for the previous
channel up.
<OK>
To turn the recording on/off.
<right>
Searching for stations of a higher frequency.
<left>
Searching for stations on lower frequency.
Calendar
MyPhone HAMMER 4+ is equipped with calendar option. It allows you to preview the
current or any date. To enter the calendar, select [Menu] > [Organizer] > [Calendar].
You can add notifications and reminders for that day (repeat them every day, every
week, month, year, or any day of the week), as well as edit those already inserted.
Bluetooth
The phone is equipped with a Bluetooth. It is used to wirelessly connect and exchange
files with other devices equipped with Bluetooth. To use Bluetooth enter: [Menu] >
[Settings] > [Connectivity] > [Bluetooth]. The following options are available:
• [Power] – by pressing <OK> the Bluetooth signal is switched on/off. It is signalled
with a Bluetooth icon displayed on the upper status bar on the phone main screen.
• [Visibility] – Enabling this feature allows the visibility of your phone on the list of
available devices other phones, tablets and computers equipped with Bluetooth.
• [My device] - an option [Search new device] is situated here which allows you to
display a list of available Bluetooth devices in range. This feature allows you to
connect to a device from the list.
• [Search audio device] - this option enables searching and connection the phone to
audio devices which are equipped with Bluetooth i.e. Bluetooth headphones.
• [My name] – the name visible to other Bluetooth devices can be typed in here.
Default name is Hammer_4_plus.
• [Advanced] - This option allows you to configure the audio transfer function
between the Bluetooth headset and the phone, [Audio Path], select memory to
save downloaded Bluetooth files (Phone, memory card, manual selection), set
readability or full control over files - [Permit Access], displaying the MAC address
of the phone - [My Address].