Hammer Bow+ - Phone Menu Access; Customize Your Phone; Turning the Meeting Mode on and off; Sounds and User Profiles

To Next Page

To Previous Page

Phone menu access

To gain access to the phone menu one should press <Menu> button, while

on phone display. By pressing navigation buttons <up>, <down>, <left> or

<right>, move to the wanted menu icon. Press <OK> button to confirm your

choice (and enter the menu item) or <Back> to return to previous

menu/desktop.

Customize your phone

HAMMER Bow+ can be customized to your needs.

This makes its use more enjoyable and easier.

Turning the "Meeting” mode on and off

To turn off sounds use <#> button. Press it and hold for about 3 seconds,

until „Meeting mode activated” announcement is displayed. By pressing and

holding the <#> key again will return to the previous sound profile.

Sounds and user profiles

To set ringtones and volume in the phone use [User profiles] option. To

launch it press <Menu> button and enter the phone menu. Subsequently,

with use of navigation buttons choose an option [Settings] >[User profiles]

and press <OK>. Select the chosen sound profile and enter [Options] >

[Activate] > [Select] or <OK> to activate the chosen profile or [Options] >

[Customize] > [Select], to edit the profile according to your own preferences.

Available sound profile options:

• [Alert type] - enter [Options] > [Change] and select between Ring only,

Vibration only and combination thereof.

• [Ring type] – enter [Options] > [Change] > <Select> and select the

chosen ringtone type - ascending, repeat, beep once., repeat, beep

once.

• [Sim 1 incoming call] or [Sim 2 incoming call] – option allows you to

change incoming call ringtone melody for SIM 1 or SIM 2 –enter

[Options] > [Change] > <Select>, choose the melody and confirm with

<OK> button.

• [Ringtone volume] – adjust the volume with <left> and <right> buttons.

• [SIM1 message] or [SIM2 message] - to change the ringtone of

incoming SMS for SIM1 or SIM2 enter: [Options] > [Change] > <OK>

select the ringtone.

• [Message volume] – adjust the volume with <left> and <right> buttons.

• [Keypad] - enter [Options] > [Change] > <OK> and select type of keypad

sound (Tone, Click, Human voice tone) then press <OK> to confirm or

change the type of sound by pressing <left> or <right>.

• [Keypad volume] – adjust the volume with <left> and <right> buttons.