To Next PageTo Next PageWhat to do if my HAMPTON BAY Fan will not start?
If your HAMPTON BAY Fan won't start, begin by checking the main and branch circuit fuses or breakers. Also, inspect the line wire connections to the fan and the switch wire connections within the switch housing to ensure they are properly connected.
How to fix a wobbling HAMPTON BAY EF200-36?
If your HAMPTON BAY Fan is wobbling, make sure that all blade and blade arm screws are secure. Most fan wobble problems are caused when blade levels are unequal. Check the level by measuring from a point on the center of each blade to a point on the ceiling. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes. If the blade wobble is still noticeable, use the enclosed blade balancing kit.
General| Number of Blades | 5 |
|---|---|
| Motor Type | AC |
| Finish | Oil Rubbed Bronze |
| Light Included | No |
| Reversible Motor | Yes |
| Blade Span | 36 inches |
| Mounting Type | Downrod |
| Warranty | Lifetime |
Information on the fan's warranty coverage and terms.
Key performance and measurement data for the fan.
List of essential tools needed for installation.
Identifies all included hardware components for assembly.
Lists all parts included in the fan's packaging.
Details different methods for securely mounting the fan.
Step-by-step guide for assembling the fan using a standard mount.
Instructions for assembling the fan for a close-to-ceiling installation.
Procedures for safely attaching the fan motor assembly to the mounting bracket.
Steps for securely attaching the fan blades to the motor assembly.
Guide for connecting and installing the fan's light kit.
Instructions for installing the fan without the light kit assembly.
