EN
46
• The high-pressure washer is intended to be used with water at a maximum
temperature of 40°C. Higher temperatures can damage the high-pressure washer.
• Only use water that is free from sand, chemicals and other impurities.
Impurities can reduce functionality and shorten the useful life of the high-
pressure washer.
• Water that has passed the check valve is not suitable for drinking water.
• Only use the high-pressure washer with clean water. Unltered water, or water
with corrosive chemicals, can damage the machine.
Using an extension cord
• An extension cord must be waterproof. Unsuitable extension cords can cause a
re and/or electric shock.
– Always pull out the complete extension cord.
– An extension cord must comply with the following requirements
concerning its cross sectional area and length.
– Keep power cord connections dry and above ground.
Positioning
• Place the high-pressure washer on a level, stable surface when in use and
during handling, transport and storage. If the high-pressure washer tips over or
drops it can cause personal injury.
1.0 mm² Max 12.5 m
1.5 mm² Max 20 m
2.5 mm² Max 30 m
To Next Page
Loading...
