Hamworthy S3-100 User Manual

IMPORTANT NOTE
THESE INSTRUCTIONS MUST BE READ
AND UNDERSTOOD BEFORE INSTALLING,
COMMISSIONING, OPERATING OR
SERVICING EQUIPMENT AND TO BE LEFT
ADJACENT TO THE GAS METER
INSTALLATION, COMMISSIONING AND
SERVICING INSTRUCTIONS
Wall Hung, Condensing, Room Sealed,
Fully Modulating, Pre-Mix,
Gas Fired Boilers for Heating & Domestic
Hot Water Installations
STRATTON MK3 SERIES BOILERS
NATURAL GAS & PROPANE
Models: S3-40, S3-60, S3-70, S3-80, S3-100, S3-120, S3-150

Hamworthy S3-100 Specifications

General

Brand	Hamworthy
Model	S3-100
Category	Boiler
Language	English

Summary

WARNINGS AND RECOMMENDATIONS

Personnel Qualification Requirements

Specifies the required qualifications for handling the boiler.

Essential Safety Instructions

Crucial safety information and regulations for installation and operation.

Water Characteristics and System Protection

TECHNICAL SPECIFICATIONS

Boiler Component Identification

Identifies and illustrates the key internal components of the boiler.

Combustion Performance Data

Electrical Connection Specifications

INSTALLATION PROCEDURES

Boiler Mounting and Installation

Step-by-step guide and requirements for physically mounting the boiler.

Flue Connection and System Assembly

Detailed guidance on flue connection, ventilation, assembly, and condensate removal.

Gas Connection and Conversion

Procedures for connecting gas supply and converting between gas types.

Hydraulic System Connection

Essential steps for connecting the boiler to the heating and hot water circuits.

Electrical Connection and Wiring

Comprehensive guide to wiring the boiler and its control systems.

INITIAL START-UP AND CHECKS

Pre-First Use Checks

Essential checks before initial operation to ensure safety and correctness.

First Use and Commissioning Procedure

POST-COMMISSIONING CHECKS

MAINTENANCE OPERATIONS

Annual Maintenance Checks

HYDRAULIC DIAGRAMS AND CONFIGURATIONS

CUSTOMER PARAMETER TABLE