Need help?Do you have a question about the Hamworthy Stratton mk3 and is the answer not in the manual?
Configuration and connection of Stratton mk3 boilers for Natural Gas and Propane, including test points.
Guidelines for locating and securing frame kits for boiler systems on a suitable floor.
Precautions and techniques for safely moving and handling boiler equipment, emphasizing back and body posture.
Components within the connection kit, including isolating valves, pumps, drain cocks, and seals.
Requirements for adequate access, clearances, and pipework routing for installation and servicing.
Procedure for placing, bolting, and securing frame kit sections to the floor.
Steps for connecting the gas hose to the header and boiler using approved jointing compound.
Ensuring boiler pressure relief connections are piped to safety.
Specific wiring details for connecting the Magna 1 boiler pump to the system.
Specific wiring details for connecting the UPMXXL boiler pump to the system.
General| Boiler Type | Condensing |
|---|---|
| Fuel Type | Natural Gas |
| Working Pressure | 6 bar |
| Mounting | Wall |
| Flue Diameter | 80/125 mm |
To Next Page