Hamworthy Stratton mk3 - Multiple Boiler System Components

6
80-150 kW Frame & Header Kits Manual
3 MULTIPLE BOILER SYSTEM COMPONENTS
3.1 GENERAL
The multiple boiler systems consist of the following components:
• Pipekit (1 and 2 wide congurations)
• Boiler gas header.
• Boiler ow and return headers supported on mounting skid
• Low loss mixing header (optional)
• Hardware pack (includes essential connection and valve components)
• Circuit extension kits (optional)
• Plate Heat exchanger kit (optional)
• Boiler pump
3.2 MAIN WATER HEADERS
The main water headers consist of: water ow, water return headers custom sized for all boilers. It is possible to extend the system to a
maximum of 6 boilers in a linear conguration.
Each header kit provides water ow and return headers sized either DN80 or DN100 dependent on total maximum combined heating
output required.
3.3 GAS HEADER
The Gas header consists of a custom manufactured 2” manifold. This is located in a cradle incorporated within the header mounting skid.
3.4 BOILER PUMP
Pump kits and External pump controls (sold separately) are designed to provide the optimum ow around the appliance water circuit
ensuring the maximum ow rates are contained within the design constrains of the appliance.