Quick Check® 600/800 Series User’s Guide 3 - 17
RI & RD, P.C.S., Symbol Contrast, Rmin/Rmax, Modulation, EC(min),
Defects, Message Type, Message Length or Check Character
Error Override: Yes or No
LEDs: P/F Criteria or Bar Growth
Output Options
Printer Type: (Choose One)
Q C P, H S P, S S P
Printout: Long form or short form
AutoPrint/Store: On or Off
With profile: Yes or No
Generic Code Selections
U.P.C./EAN/JAN
Enable: On or Off
Magnification Factor? (Choose One)
080/085/095/100/105/110/115/120/125/130/140/150/160/180/200
Expand UPC-EO: Yes or No
Code 39
Enable: On or Off
Character Check: None or Checked
Fixed W/N: None or select value between 1.4 and 3.9 ± 0.2
Fixed message length: None or select value between 1 and 49
characters
Interleaved 2 of 5
Enable: On or Off
Character Digit: None or Checked
Fixed W/N: None or select value between 1.4 and 3.9 ± 0.2
Fixed message length: None or select value between 2 and 78 digits
Code 128
Enable: On or Off
Modes Shown: Yes or No
Fixed message length: None or select value between 1 and 70
characters
Code 93
Enable: On or Off
Fixed message length: None or select value between 1 and 80
characters (from Code 39 set)
Codabar
Enable: On or Off
Character Font and Tolerances: (Choose one)
Trad’l, “USS” or ISO/IEC ‘83
Fixed W/N: None or select value between 1.4 and 3.9 ± 0.2
Fixed message length: None or select value between 1 and 61 digits
Code 11
Enable: On or Off
To Next Page
Loading...
